METALNOX M6353 is an innovative aqueous cleaning solution designed to meet the stringent demands of automotive and diesel remanufacturing operations. M6353 effectively removes heavily burned-on oil and carbonaceous soils from aluminum and steel parts without damaging or discoloring. METALNOX M6353 is highly concentrated and when diluted is highly effective in ultrasonic and immersion cleaning systems.

METALNOX M6353 provides for an exceptionally long bath life. M6353 is a low VOC solution that rapidly removes years of oils and environmental exposure, unlike traditional caustic soaps, that is always a challenge for the remanufacturing industry. METALNOX M6353 will leave a clean, spot-free surface on parts when rinsed with clean water, making them ready for the next stage of the remanufacturing process cycle.

Product Data
Application: REMANUFACTURING / THERMAL DEBURRING
Typical Process
Process: Immersion & Ultrasonic
Concentration: 10-15%
Temperature: 140°F-158°F / 60°C-70°C
Rinse: Optional as required
Dry: Air
Product Properties
pH (10g/L): 11.4
Flash Point: None to Boiling
Boiling Point: 216°F/102°C
Water Soluble: Complete
VOC, @ 10% 3.1 g/L

NOTE: The above process parameters are recommendations based on extensive testing done in KYZEN’s application lab. Your KYZEN sales representative can assist you in optimizing your process parameters.

×
Fields marked with * are required
Product Supplement
A Representative to Contact Me
Please see comments below
×
Fields marked with * are required

Process Control Center

Improve productivity with advanced products and services that monitor, manage and control your cleaning processes.

×