High-tech, high-value cleaning answers made easy.
All Tech 2 Tech Sessions are conveniently offered in 2 time slots to allow for
North America, Europe and Asia Time Zones respectively.
Click here to view past sessions.
Register Below!
| Industry | Date | Time (CDT) | Topic |
|---|---|---|---|
| Multi | 10/29/20 |
The Five Forces of Cleaning: No Matter What You Clean
A multi-segment bonus that answers the question “how do I get to clean?” no matter the industry.
–Sherry Stepp
|
|
| Metal Finishing | 11/05/20 |
Metal Cleaning Process Basics – Automated Concentration Monitoring
Discover the benefits of automated wash bath monitoring.
–Wayne Raney
|
|
| Electronic Assembly |
11/12/20 |
Does Water Do the Job on It’s Own?
Low Stand-off, Tight Pitch – HELP!
–KJ Lee
|
Past Sessions
| Industry | Date | Video/Q&As | Topic |
|---|---|---|---|
| Electronic Assembly |
10/22/20 | Coming Soon |
Electronic Assembly Cleaning Basics – Automated Concentration Monitoring
Set it and forget it – Benefits of Automation.
–Dirk Ellis
|
| Metal Finishing | 10/15/20 |
Metal Cleaning Process Basics – Manual Concentration Monitoring
Learn the different ways to check your concentration and make sure it is in check. -Ethan Mueller
|
|
| Electronic Assembly |
10/08/20 |
Electronic Assembly Cleaning Basics – Manual Concentration Monitoring
Knowing what your chemistry concentration is will save you money in the long run.
–Luis Fernando Gazcon
|
|
| Metal Finishing | 10/01/20 | Video/Q&As |
My Wash Bath Looks Dirty, Are My Parts?
Tune in for advice on when to change out your wash tank. -Eric Bromley
|
| Electronic Assembly |
09/24/20 | Video/Q&As |
PCB Cleaning Process Bath Life – When in Doubt, Dump it Out
Advice on how to determine if your process is still working.
-Scott Cain
|
| Metal Finishing | 09/17/20 |
nPB Banned in My Degreasing Process – How Do I Replace It?
With the recent restrictions on nPB – How do you clean now? -Joe McChesney
|
|
| Electronic Assembly |
09/10/20 |
Is My Printed Circuit Board Wash Concentration in Check?
What is the best concentration for PCB Cleaning?
-Kevin Buckner
|
|
| Metal Finishing | 09/03/20 |
Parts Washing & Chemistry – Too Much? Too Little?
What is the “just right” range for a balanced cleaning process? -Chuck Sexton
|
|
| Electronic Assembly |
08/27/20 |
Foaming in Your Cleaning Process?
Bathtubs and kitchen sinks have one thing in common – bubbles and foam. Do you want bubbles in your cleaning process?
-Erik Miller
|
|
| Metal Finishing | 08/18/20 |
Foam in Your Wash Tank?
Foam can pop up in different stages of your wash process – tune in to find out how to deal with it.
–Jason Schwartz |
|
| Electronic Assembly |
08/13/20 |
Importance of Rinsing
It has been said that you are only as clean as your final rinse – ever wonder why? –Ram Wissel |
|
| Metal Finishing | 08/04/20 |
Why Rinsing your Parts is Important
Rinsing can be a key factor of your cleaning process depending on what happens to the part next. Find out just why it is so important.
-Fernando Rueda |
|
| Electronic Assembly |
07/30/20 |
How Does pH Affect Cleaning?
A neutral pH is difficult to maintain – what is the science behind it?
-Debbie Carboni |
|
| Electronic Assembly |
07/21/20 |
Qualification vs Production
What is the difference? Why does it matter?
-Tom Forsythe |